Newport Brass 3180_5623 Seager Cold Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handle
Contemporary lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-1/4 in. (15.9 cm) spout height at outlet
4 in. (10.2 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
California Energy Commission (CEC) Compliant
Weight per Each: 3.65 lbs
Length per Each: 18 in.
Width per Each: 12.25 in.
Height per Each: 3.25 in.
The following part numbers are available by selecting the options above.
3180-5623/013180-5623/0343180-5623/03N3180-5623/043180-5623/063180-5623/073180-5623/08A3180-5623/103180-5623/10B3180-5623/153180-5623/15A3180-5623/15P3180-5623/15S3180-5623/203180-5623/243180-5623/24A3180-5623/24S3180-5623/263180-5623/303180-5623/523180-5623/563180-5623/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0709180111246070918011125307091801112600709180111284070918011129107091801113070709180111314070918011133807091801113450709180089514070918011136907091803040990709180089521070918008953807091801113760709180111383070918011139007091800895450709180181034070918011141307091801114370709180111468