Newport Brass 1030_5623 Chesterfield Cold Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handle
Traditional lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-1/2 in. (16.5 cm) spout height at outlet
4-3/4 in. (12.1 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
California Energy Commission (CEC) Compliant
Weight per Each: 3.65 lbs
Length per Each: 18 in.
Width per Each: 12.25 in.
Height per Each: 3.25 in.
The following part numbers are available by selecting the options above.
1030-5623/011030-5623/0341030-5623/03N1030-5623/041030-5623/061030-5623/071030-5623/08A1030-5623/101030-5623/10B1030-5623/151030-5623/15A1030-5623/15P1030-5623/15S1030-5623/201030-5623/241030-5623/24A1030-5623/24S1030-5623/261030-5623/301030-5623/521030-5623/561030-5623/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0760724623571076072462361807607246236560760724623731076072459914207607246237790760724623816076072462389207607246239390760724599159076072462401107091802900880760724599166076072459917307607246241340760724624172076072462421907607245991800709180175255076072462429507607246243700760724624493