Newport Brass 2470_5613 Jacobean Hot Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handle
Traditional lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-5/8 in. (16.8 cm) spout height at outlet
4-3/4 in. (12.1 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
Hot Water Tank (item 5-036) sold separately.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
California Energy Commission (CEC) Compliant
Weight per Each: 3.25 lbs
Length per Each: 18 in.
Width per Each: 12.25 in.
Height per Each: 3.25 in.
The following part numbers are available by selecting the options above.
2470-5613/012470-5613/0342470-5613/03N2470-5613/042470-5613/062470-5613/072470-5613/08A2470-5613/102470-5613/10B2470-5613/152470-5613/15A2470-5613/15P2470-5613/15S2470-5613/202470-5613/242470-5613/24A2470-5613/24S2470-5613/262470-5613/302470-5613/522470-5613/562470-5613/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0760724448648076072455430107607244458070760724446439076072442627107607244472380760724431589076072444199107607244262880760724433422076072444924907091803024460760724427223076072442626407607244316330760724443087076072444364307607244262570709180178126076072444076507607244522320760724447955