Newport Brass 2940_5603 Taft Hot & Cold Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handles
Traditional lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-3/4 in. (17.1 cm) spout height at outlet
4-3/4 in. (12.1 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
Hot Water Tank (item 5-036) sold separately.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
Weight per Each: 4.6 lbs
Length per Each: 17 in.
Width per Each: 12 in.
Height per Each: 3 in.
The following part numbers are available by selecting the options above.
2940-5603/012940-5603/0342940-5603/03N2940-5603/042940-5603/062940-5603/072940-5603/08A2940-5603/102940-5603/10B2940-5603/152940-5603/15A2940-5603/15P2940-5603/15S2940-5603/202940-5603/242940-5603/24A2940-5603/24S2940-5603/262940-5603/302940-5603/522940-5603/562940-5603/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0760724604143076072460416707607246041810760724604228076072459933307607246042420760724604266076072460430307607246043270760724599340076072460436507091802517510760724599357076072459936407607246044260760724604440076072460446407607245993710709180179482076072460450107607246045490760724604600