Newport Brass 2940_5613 Taft Hot Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handle
Traditional lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-3/4 in. (17.1 cm) spout height at outlet
4-3/4 in. (12.1 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
Hot Water Tank (item 5-036) sold separately.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
California Energy Commission (CEC) Compliant
Weight per Each: 4.3 lbs
Length per Each: 18 in.
Width per Each: 12.25 in.
Height per Each: 3.25 in.
The following part numbers are available by selecting the options above.
2940-5613/012940-5613/0342940-5613/03N2940-5613/042940-5613/062940-5613/072940-5613/08A2940-5613/102940-5613/10B2940-5613/152940-5613/15A2940-5613/15P2940-5613/15S2940-5613/202940-5613/242940-5613/24A2940-5613/24S2940-5613/262940-5613/302940-5613/522940-5613/562940-5613/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0760724604624076072460464807607246046620760724604709076072459924107607246047230760724604747076072460478507607246048080760724599258076072460484607091803032900760724599265076072459927207607246049070760724604921076072460494507607245992890709180179499076072460498307607246050270760724605089