Newport Brass 2940_5623 Taft Cold Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handle
Traditional lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-3/4 in. (17.1 cm) spout height at outlet
4-3/4 in. (12.1 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
California Energy Commission (CEC) Compliant
Weight per Each: 3.65 lbs
Length per Each: 18 in.
Width per Each: 12.25 in.
Height per Each: 3.25 in.
The following part numbers are available by selecting the options above.
2940-5623/012940-5623/0342940-5623/03N2940-5623/042940-5623/062940-5623/072940-5623/08A2940-5623/102940-5623/10B2940-5623/152940-5623/15A2940-5623/15P2940-5623/15S2940-5623/202940-5623/242940-5623/24A2940-5623/24S2940-5623/262940-5623/302940-5623/522940-5623/562940-5623/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0760724605102076072460512607607246051400760724605188076072459919707607246052010760724605225076072460526307607246052870760724599203076072460532407091801872270760724599210076072459922707607246053860760724605409076072460542307607245992340709180179505076072460544707607246054850760724605546