Newport Brass 3160_5603 Zemora Hot & Cold Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handles
Transitional lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-5/8 in. (16.8 cm) spout height at outlet
4-3/4 in. (12.1 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
Hot Water Tank (item 5-036) sold separately.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
Weight per Each: 4.6 lbs
Length per Each: 17 in.
Width per Each: 12 in.
Height per Each: 3 in.
The following part numbers are available by selecting the options above.
3160-5603/013160-5603/0343160-5603/03N3160-5603/043160-5603/063160-5603/073160-5603/08A3160-5603/103160-5603/10B3160-5603/153160-5603/15A3160-5603/15P3160-5603/15S3160-5603/203160-5603/243160-5603/24A3160-5603/24S3160-5603/263160-5603/303160-5603/523160-5603/563160-5603/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0709180113493070918011350907091801135160709180113530070918011354707091801135540709180113561070918011358507091801135920709180113615070918011362207091803037880709180113639070918011364607091801136530709180113660070918011367707091801136840709180180310070918011370707091801137210709180113752