Newport Brass 3160_5613 Zemora Hot Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handle
Transitional lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-5/8 in. (16.8 cm) spout height at outlet
4-3/4 in. (12.1 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
Hot Water Tank (item 5-036) sold separately.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
California Energy Commission (CEC) Compliant
Weight per Each: 4.3 lbs
Length per Each: 18 in.
Width per Each: 12.25 in.
Height per Each: 3.25 in.
The following part numbers are available by selecting the options above.
3160-5613/013160-5613/0343160-5613/03N3160-5613/043160-5613/063160-5613/073160-5613/08A3160-5613/103160-5613/10B3160-5613/153160-5613/15A3160-5613/15P3160-5613/15S3160-5613/203160-5613/243160-5613/24A3160-5613/24S3160-5613/263160-5613/303160-5613/523160-5613/563160-5613/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0709180113998070918011400107091801140180709180114032070918011404907091801140560709180114063070918011408707091801140940709180114117070918011412407091803037950709180114131070918011414807091801141550709180114162070918011417907091800893090709180180327070918011419307091801142160709180114247