Newport Brass 3160_5623 Zemora Cold Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handle
Transitional lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-5/8 in. (16.8 cm) spout height at outlet
4-3/4 in. (12.1 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
California Energy Commission (CEC) Compliant
Weight per Each: 3.65 lbs
Length per Each: 18 in.
Width per Each: 12.25 in.
Height per Each: 3.25 in.
The following part numbers are available by selecting the options above.
3160-5623/013160-5623/0343160-5623/03N3160-5623/043160-5623/063160-5623/073160-5623/08A3160-5623/103160-5623/10B3160-5623/153160-5623/15A3160-5623/15P3160-5623/15S3160-5623/203160-5623/243160-5623/24A3160-5623/24S3160-5623/263160-5623/303160-5623/523160-5623/563160-5623/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0709180113769070918011377607091801137830709180113806070918011381307091801138200709180113837070918011385107091801138680709180089316070918011388207091803038010709180089323070918008933007091801138990709180113905070918011391207091800893470709180180334070918011393607091801139500709180113981