Newport Brass 3190_5603 Heaney Hot & Cold Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handles
Contemporary lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-1/4 in. (15.9 cm) spout height at outlet
4 in. (10.2 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
Hot Water Tank (item 5-036) sold separately.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
Weight per Each: 4.6 lbs
Length per Each: 17 in.
Width per Each: 12 in.
Height per Each: 3 in.
The following part numbers are available by selecting the options above.
3190-5603/013190-5603/0343190-5603/03N3190-5603/043190-5603/063190-5603/073190-5603/08A3190-5603/103190-5603/10B3190-5603/153190-5603/15A3190-5603/15P3190-5603/15S3190-5603/203190-5603/243190-5603/24A3190-5603/24S3190-5603/263190-5603/303190-5603/523190-5603/563190-5603/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0709180109717070918010972407091801097310709180109755070918010976207091801097790709180109786070918010980907091801098160709180109830070918010984707091803041500709180109854070918010986107091801098780709180109885070918010989207091800896680709180181119070918010991507091801099390709180109960