Newport Brass 3210_5623 Gavin Cold Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handle
Contemporary lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-5/8 in. (16.8 cm) spout height at outlet
4-3/4 in. (12.1 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
California Energy Commission (CEC) Compliant
Weight per Each: 3.65 lbs
Length per Each: 18 in.
Width per Each: 12.25 in.
Height per Each: 3.25 in.
The following part numbers are available by selecting the options above.
3210-5623/013210-5623/0343210-5623/03N3210-5623/043210-5623/063210-5623/073210-5623/08A3210-5623/103210-5623/10B3210-5623/153210-5623/15A3210-5623/15P3210-5623/15S3210-5623/203210-5623/243210-5623/24A3210-5623/24S3210-5623/263210-5623/303210-5623/523210-5623/563210-5623/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0709180058916070918005892307091800589300709180058954070918005896107091800589780709180058985070918005900507091800590120709180059036070918005904307091803043410709180059050070918005906707091800590740709180059081070918005909807091800591040709180181539070918005912807091800591420709180059173