Newport Brass 3290_5603 Muncy Hot & Cold Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handles
Contemporary Knurled lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-1/4 in. (15.9 cm) spout height at outlet
4 in. (10.2 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
Hot Water Tank (item 5-036) sold separately.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
Weight per Each: 4.6 lbs
Length per Each: 17 in.
Width per Each: 12 in.
Height per Each: 3 in.
The following part numbers are available by selecting the options above.
3290-5603/013290-5603/0343290-5603/03N3290-5603/043290-5603/063290-5603/073290-5603/08A3290-5603/103290-5603/10B3290-5603/153290-5603/15A3290-5603/15P3290-5603/15S3290-5603/203290-5603/243290-5603/24A3290-5603/24S3290-5603/263290-5603/303290-5603/523290-5603/563290-5603/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0709180193532070918019354907091801574420709180159699070918015852407091801935630709180193570070918015968207091801935940709180157459070918019361707091802969670709180193624070918019363107091801936480709180193655070918019366207091801585310709180193679070918019369307091801937160709180193747