Newport Brass East Linear Hot & Cold Water Dispenser Satin Nickel PVD - 106/15S
For single hole configurations
Solid brass construction
ADA Compliant Lever Handles
Contemporary lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-3/16 in. (15.7 cm) spout height at outlet
4 in. (10.2 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
Hot Water Tank (item 5-036) sold separately.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
California Energy Commission (CEC) Compliant
Weight per Each: 2.0 lbs
Length per Each: 18 in.
Width per Each: 12 in.
Height per Each: 3 in.
The following part numbers are available by selecting the options above.
106/01106/034106/03N106/04106/06106/07106/08A106/10106/10B106/15106/15A106/15P106/15S106/20106/24106/24A106/24S106/26106/30106/52106/56106/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0091388293993076072454815707607242213950091388719424009138871943100913887194480091388719462009138871948600913882940370091388294068009138871950907091801359520091388247224009138823206007607242214700760724221517009138871952300913882999710709180175361076072422155500913887195610760724221630